SeaSucker Roof Rack Review - 2016 Chevrolet Colorado- Video

Today, on our 2016 Chevrolet Colorado, we're going to look at the SeaSucker Monkey Bar roof rack system. As you can see, we have the front one installed here to give you an idea of how it will look on the truck. We'll kind of go over some of the features here. The crossbars are made out of an aluminum. They're an inch and a quarter round, and they're four foot wide.Now, they're held into place by your SeaSucker vacuum cups here, which are adjustable inside and out. That way, you're able to find that good spot on your roof to keep them nice and secure. more

Watch Video

1/3/2019 7:27:25 AM

Yakima Roof Rack Review - 2017 Chevrolet Trax- Video

Speaker 1: Today on our 2017 Chevrolet Trax we're going to be doing a test fit on the Yakima Roof Rack System. Using the JetStream Crossbars and the Timberline Towers with part numbers Y00425 and Y00147. Now the JetStream Crossbars are also available in silver with part number Y00428. This Yakima Roof Rack System is specifically designed to fit your Chevrolet Trax's raised rails. It uses asymmetrical JetFlow shaped crossbars that are aluminum to carry your accessories. It also features a T-slot for your T-slot accessories. more

Watch Video

11/15/2017 3:43:02 PM

Yakima Roof Rack Review - 2017 Chevrolet Trax y00147- Video

Speaker 1: Today on our 2017 Chevrolet Trax we're going to be taking a look at the Yakima Round Bar Roof Rack System. Included in the kit, you're going to be getting the 48 inch round bars, the timberline towers, and the round bar adapters.The round design is not only suitable for kayak carriers, bike racks, cargo baskets and cargo carriers, but it also works well with bungee cords and other ratchet straps that will attach easily to it with our hooks. One of the great things about these round bars is their 220 pound load capacity. Unlike the standard aluminum arrow bars that only hold 165 pounds, you can load up that extra gear that you wouldn't be able to otherwise. You can also get the Yakima Same Key System, which will come with locking cylinders for all of your timberline towers, and it'll have one key to match all of them. This be found at etrailer.com with part number Y07204.This roof rack system will add about 3 inches to the height of your vehicle. more

Watch Video

11/13/2017 10:22:41 AM

Yakima Roof Rack Review - 2017 Chevrolet Trax y00147- Video

Speaker 1: Today in our 2017 Chevrolet Trax, we're going to be taking a look at the Yakima roof rack system. The kit consists of 50 inch long core bar cross bars and timberline towers.These help ease the load inside your vehicle, or carry a kayak, bike rack, or your other favorite accessories. It's got a tear drop shape that will reduce wind noise and drag. The real driving factor for the cross bars are as added capacity of 220 pounds, compared to most with only 165. Do make sure you check your Chevrolet Trax's owner's manual to insure it can accommodate that weight capacity.To protect your investment, you can install the Yakima lock cores, which can be key to like, and found at etrail.com with part number Y07204. This system will add about three and a quarter inches to the heighth of your vehicle. more

Watch Video

11/10/2017 11:07:24 AM

Thule Roof Rack Installation - 2017 Chevrolet Trax- Video

Speaker 1: Today, on our 2017 Chevrolet Trax, we're gonna be doing a test fit on the Thule Crossroad Square Load Bar Roof Rack System using parts numbers THLB50 for the 50 inch square bars, and part number TH450 for the Thule Crossroad foot pack. The Thule Crossroad square bar roof rack system is an entry level solution for carrying your accessories. It's gonna allow you to carry kayak carriers, roof mounted bike racks, cargo baskets, and cargo boxes. It features square steel load bars that it'll offer excellent support for your accessories.The entire bar has a plastic coating so it's gonna help prevent rust and corrosion. One of the benefits of having a steel bar is that we don't have to worry about any bending or denting compared to an aluminum bar. The Crossroad foot packs mount to our raised factory rails with a rubber coated strap, so we don't have to worry about any harm coming to our raised factory rails.Now that we've been over the features, I'll go ahead and show you how to get it installed. more

Watch Video

11/10/2017 11:07:13 AM

Yakima Roof Rack Review - 2011 Chevrolet Malibu- Video

Male: Today in our 2011 Chevrolet Malibu, we're going to be test fitting the Yakima Jetstream roof rack system, consisting of part numbers Y00425, these are the Yakima Jetstream crossbars, 50 inches long. Part number Y00146, and these are the baseline towers for the Yakima crossbars. And part number Y06127 and Y06153, these are the base clip fit kits for the vehicle and these are what clamp it onto your vehicle. We already have the front one installed, as you can see it has a nice aerodynamic shape to it. It has a carrying capacity of 220 pounds, although, you want to double check with your vehicles manufacture's instructions to make sure that your roof can withstand that kind of weight. Let's go ahead and show you how the rear one gets put on. We already have it partially assembled on our table here. Now when you first get the bars, you're actually going to see that there is a strip on the inside. more

Watch Video

10/6/2016 1:57:17 PM

Rhino Rack Roof Rack Review - 2011 Chevrolet Malibu- Video

Today on our 2011 Chevrolet Malibu, we're going to be test fitting the Rhino-Rack Roof Rack System. This is going to consist of part numbers RRVA126B-2. These are the Vortex Aero Crossbars, forty-nine inches long in black. These also come in silver as part number RRVA126S-2. We also have RRRLKVA. These are the 2500 Series Legs for the Vortex Aero Crossbars, and part number DK183, and this is the custom fit kit for this particular vehicle, and this is how it clamps to your car. We have the front one already installed. more

Watch Video

10/6/2016 1:57:13 PM

Rhino Rack Roof Rack Review - 2014 Chevrolet Sonic- Video

Today on our 2014 Chevrolet Sonic, we are going to be taking a look at the Rhino Rack Roof Rack System consisting of part numbers RRVA106B-2. These are the Vortex Aero crossbars in black, 41" long. These also come in silver as part number RRVA106S-2. We also have part number RRRLKVA. These are the 2500 series legs for the Vortex Aero crossbars. Part number DK315, this is the custom fit kit for this particular vehicle. more

Watch Video

10/6/2016 1:57:03 PM

Yakima Roof Rack Review - 2011 Chevrolet Malibu Y00146- Video

Today on our 2011 Chevrolet Malibu, we're going to be test fitting the Yakima Roof Rack System, featuring part numbers Y00421, and these are the Yakima Core Bars, steel, 50 inches long. Also part number Y00146, and these are the baseline towers for the Yakima Cross Bars. And part number Y06127 and Y06153, and these are the base clip kits for the vehicle so they can clamp onto your vehicle. We already have the front one installed, and the bars themselves have a nice aerodynamic shape to them. Which is going to cut down wind noise and drag while you are driving. Now combine with the other bar, these have a little bit more of a heavy duty to them, and they have a weight capacity of 220 lbs. Now you do want to double check with your vehicle's manual, to double check that your roof can withstand that kind of weight. They are very nice and sleek looking, almost look factory installed on your vehicle. more

Watch Video

10/6/2016 1:56:47 PM

Rhino Rack Roof Rack Review - 2016 Chevrolet Equinox- Video

Today on our 2016 Chevy Equinox we're doing a test fit of the Rhino Rack Vortex Aero Crossbars. The part number for the crossbars we're using today is RRVA118B-2. For our SX Theories legs we're using RRSX005. Now, we already have the front bar installed. We're going to show you how to put the last foot pack onto our crossbar and then how we load the crossbar up and secure it down. We'll start by taking out foot pack here. more

Watch Video

6/1/2016 8:26:07 AM

Rhino Rack Roof Rack Review - 2010 Chevrolet Cobalt- Video

Today on this 2010 Chevrolet Cobalt we're going to be test fitting the Rhino-Rack Roof Rack System. It consists of part numbers RRVA118B, which would be the crossbars, as well as the legs, part number RRRLKVA, and then the clamps, part number DK181. This is specific to this vehicle. Now if you look at the bars here at the front which we've already installed, they are aerodynamic, which will cut down wind noise and drag, and both the ends caps as well as the legs themselves are lockable to secure it to your vehicle once you have it installed. Let's show you how the rear one installs now. We kind of have a rear one partially put together. We have the 1 side done already. Now I'll show you the other side. more

Watch Video

4/20/2016 10:26:30 AM

Thule Roof Rack Review - 2016 Chevrolet Tahoe- Video

Today on our 2016 Chevrolet Tahoe, we're doing a test fit of the Thule Arrow Blade crossbars. The part number for our crossbars today is THARB60. For our podium foot pack here, we're using TH460R and for our fit kit for our Tahoe we're using THKIT4041. Now we already have that front crossbar installed in place, but we're going to show you, explain how we put that foot pack together and show you actually how we put the crossbar on our vehicle. We have this all set up. We have to slide our crossbar off. more

Watch Video

3/29/2016 11:26:06 AM

Rhino Rack Roof Rack Review - 2015 Chevrolet Malibu- Video

Today on our 2015 Chevrolet Malibu, we're going to take a look at the Rhino Rack Vortex Aero Roof and Rack System. The crossbars are RRVA126B-2. The foot pack is RRLKVA and the kit will be DK338. We have the first one already on. Going to show you how we install the second one. We have our crossbars. We have our foot pack and a kit. more

Watch Video

1/8/2016 8:24:58 AM

Inno Roof Rack Review - 2015 Chevrolet Cruze- Video

Today on our two thousand and fifteen Chevrolet Cruze we're going to take a look at the N O Aero bar roof rack. The crossbar part number is I N X B one zero zero dash one zero eight. The N O feet are I N X S two zero zero, and the pad and clamp are I N K five nine nine. Now we have the first one already on. That is crossbar one zero zero. Right here is one zero eight. more

Watch Video

12/17/2015 9:06:06 AM

Inno Roof Rack Review - 2015 Chevrolet Malibu- Video

Today, on our 2015 Chevrolet Malibu, we're doing a test fit of the Inno Aero Crossbars. The part number for the crossbars we're using in the back here is INXB108. For our front bar, we're using INXB115. Our foot pack is going to be INSX200. The fit kit we're using is INK116. We already have our back bar on. more

Watch Video

11/13/2015 11:11:06 AM

Thule Roof Rack Review - 2013 Chevrolet Captiva Sport- Video

Today, on our 2013 Chevrolet Captiva Sport, we're going to be doing a test fit of the Thule Crossroads roof rack system. It's going to come with those nice arrow blades. Part number THARB47, and the rapid crossroads foot packs, which will be part number TH450R. You can see that we have already have that first one up on the vehicle. We're going to show you how to assemble the back one that's going to go on the back side of the vehicle now. So again, that's going to be part number THAARB47, which will be your arrow blade, and then you're going to have your rapid traverse, or rapid crossroads foot packs, which would be TH450R. So first thing we'll do is we'll go ahead and pull off the end caps, just like so, and your tool will be included there, and remove the end cap. Slide the foot pack on with the strap towards the inside just like so, and place the end cap back on. more

Watch Video

9/3/2015 3:32:11 PM

Thule Roof Rack Review - 2015 Chevrolet Equinox- Video

Today on our 2015 Chevrolet Equinox we will be test fitting the Thule Rapid Crossroads roof rack system using part numbers THARB47 for our front and rear load bars, and part number TH450R for our foot packs. Now with our rear load bar already installed I'm going to go ahead and begin by showing you how to install your foot pack into your load bar. You'll want to remove your end cap and take your foot pack and slide it into the notched part. Then you can go ahead and replace your end cap. With that being done we can go ahead and put our load bar over our factory roof rack. You'll want to feed the strap underneath as you can see there. more

Watch Video

1/12/2015 1:13:16 PM

Yakima Roof Rack Review - 2015 Chevrolet Silverado 1500- Video

Today on our 2015 Chevrolet Silverado 1500 Series Crew Cab we're going to be test fitting the Yakima Roof Rack System. We're going to be using part number Y00409 for the fifty-eight inch crossbar. Also going to be using part number Y00607 and that's for the Q Clips Fit Kit right here. Also going to be using Y00124 for the Q Tower Foot Pack. Now we've already got the front crossbar installed along with foot packs, and we've got one of the foot packs on this fifty-eight inch crossbar right here. What I'd like to do is show you how to assemble the final Q tower here. more

Watch Video

1/2/2015 2:31:37 PM

Rhino Rack Roof Rack Review - 2015 Chevrolet Equinox- Video

Today on our 2015 Chevrolet Equinox we're going to be doing a test fit on the Rhino Rack Vortex Arrow Roof Rack System using the SX series foot packs. The bars themselves are part number RRVA118B-2. These are also available in silver if you'd prefer that. The foot pack, part number SX005. As you can see we've already installed our rear bar on the vehicle. I want to take just a second to show you how this goes together. more

Watch Video

12/30/2014 4:36:18 PM

Rhino Rack Roof Rack Review - 2014 Chevrolet Equinox- Video

Today on our 2014 Chevrolet Equinox we're going to do a test fit on the Rhino Rack Vortec Aero Roof Rack System. Today we're using the Rhino Rack Vortec Aero Bars part number RRVA118B-2. That's in Black. They're also available in a Silver finish part number RRVA118S-2. We're going to use the foot pack RRSX005. That part number's a set of four. more

Watch Video

10/22/2014 9:40:24 AM

Rhino Rack Roof Rack Review - 2014 Chevrolet Sonic RRVA118S-2- Video

Today on our 2014 Chevrolet Sonic, were going to be test fitting the Rhino Rack Vortex Aero Roof Rack System. Were using part numbers RRVA118S-2 for our crossbars. We use that part number for the silver. Theyre also available in the black as part number RRVA118B-2. Weve got the RRLKVA foot packs. This is a 2500 series foot pack and were using Fit Kit number DK327. Now when applying, I want to show you how to assemble the final foot kit here. more

Watch Video

10/17/2014 8:25:33 AM

Thule Roof Rack Review - 2014 Chevrolet Equinox- Video

Today on our 2014 Chevrolet Equinox we're going to take a look and do a test fit on the Thule Crossroads roof rack system. We're using two part numbers today. First the Crossroads foot packs, part number TH450, and secondly we've got our 50" square bar, part number THLB50. Now this is going to be the minimum length required to fit onto our Equinox, but if you'd like to go with a longer bar setup, that's up to you. Now I've already got the front installed onto our Equinox so I'm going to show you, before I put the rear on, how the foot pack goes on. We've got a nice square tube here. The thinner portion should be facing the middle of the car. more

Watch Video

10/16/2014 10:20:28 PM

Yakima Roof Rack Review - 2014 Chevrolet Traverse- Video

Today on our 2014 Chevy Traverse, we're going to be test fitting the Yakima Round-Bar Roof Rack System, part number Y00409 for our round bars, part number Y00124 for our foot pack, and Y00732 for our fit kit. I installed the front bar on the vehicle as well as all of our foot packs. We will show you how to put one of the foot pack and fit kits together though. You're going to start by putting the pad of the fit kit onto the bracket of the foot pack. We'll press that in place. Next what we're going to do is install our clip. We'll pull up on the cover here. What we'll need to do is take the lock core in the clip, pulling the lock core in place out. more

Watch Video

10/16/2014 3:09:47 PM

Thule Roof Rack Review - 2014 Chevrolet Equinox TH450R- Video

Today on our 2014 Chevrolet Equinox we're going to do a test fit on the Thule Rapid CrossRoads Roof Rack System. In our fit guide, it says to use part number THARB47 and part number TH450R. We have an exception today and that's that we can actually use a bar size larger. We're going to install part number THARB53 with the TH450R foot pack. This gives you six inches more bar. It's what they call plus sizing and it can allow some extra space for you mount items to. We already have the front bar installed on the vehicle. more

Watch Video

10/7/2014 7:13:39 AM

Yakima Q Tower Roof Rack Installation - 2014 Chevrolet Impala- Video

Today on our 2014 Chevy Impala, we'll be test fitting the Yakima Q Towers Roof Rack System using the 58 inch load bars. We'll be using part numbers Y00409, Y00723, Y00732 and Y00124. With everything assembled according to included instructions, we'll begin our test fit by placing the front cross bar onto the front of our roof. Now we'll need to measure nine inches from the leading edge of the glass to the leading edge of our Q Tower. We'll need to make this measurement on both the passenger and driver's side of the vehicle. Making this measurement on both sides will ensure the front crossbar is perpendicular to the roof of our Impala. Once we have the bar in position, we'll tighten down the silver thumb screw on the inside of the tower and clamp down the black plastic covers. Clamping down the cover is going to bring the clip up tightly against the roof line. more

Watch Video

4/24/2014 11:22:10 AM

SportRack Semi-Custom Roof Rack Review - 2013 Chevrolet Cruze- Video

Today on our 2013 Chevrolet Cruz we'll be test fitting the Sportrack Semi-Custom Roof Rack for naked roofs, fifty inches in length, part number SR1010. We'll begin our test fit by placing the front bar onto the front of our roof. We'll then need to measure, according to the fit guide, seven inches from the center of the door jamb to the first part of the foot. We'll make this measurement on both the driver's side and passenger's side of the vehicle to ensure the front bar is correctly in place. We can use the included allen wrench to loosen up the allen bolts to fit the brackets around the roof line. With the clamps in place, we can then again use the included allen wrench to tighten down the clips up against the roof line. Quick tech tip: You'll need to alternate sides when tightening it down so the bar doesn't favor one side of the vehicle. With the front bar in place, we can now place the rear bar onto the rear of our roof and measure the load bar spread. Now the load bar spread is the measurement from the center of the front load bar to the center of the rear load bar. We'll measure twenty-four inches from the center of the front bar to the center of the rear bar on both the passenger and driver's side of the vehicle. This will ensure that both bars are parallel to each other and perpendicular to the roof of our Cruz. more

Watch Video

9/12/2013 9:21:04 AM

Thule AeroBlade Crossroad Roof Rack Installation - 2011 Chevrolet HHR- Video

more

Watch Video

3/20/2012 12:22:54 PM

  1